Carbon Crystal Wall Panels Eco Friendly 12mm Fire-Resistant for Living Room Wall Decor
Product Introduction Of Carbon Crystal Panel
Carbon Crystal Wall Panels are innovative decorative solutions engineered for modern architectural demands. These 12mm-thick panels combine advanced carbon crystal composite technology with eco-friendly materials, offering exceptional flexibility for curved and irregular wall surfaces.
Key Features Of Carbon Crystal Panel
- Eco-Friendly Material: Composed of 60% recycled carbon fibers and plant-based resins, certified by GREENGUARD and LEED for low VOC emissions.
- Flexible Installation: 12mm thickness with a reinforced flexible backing allows bending radii up to 15°, ideal for arches, columns, and undulating designs.
- Thermal & Acoustic Insulation: Integrated air pockets reduce noise transmission by 28dB and improve thermal efficiency (R-value 1.2).
- Low Maintenance: Hydrophobic coating repels moisture, stains, and mold, suitable for humidity-prone areas like kitchens and spas.
Functional Benefits
- Quick Installation: Covers 14.4m²/hour with pre-installed edge trim.
- Thermal Insulation: R-value 4.2 m²·K/W.
- Customization: Laser-cut corporate logos into panel surfaces.
Application Scenarios Of Carbon Crystal Panel
- Commercial Spaces: Hospitals, offices, and hotels requiring IAQ compliance (ASHRAE 62.1) .
- High-Humidity Zones: Bathrooms, kitchens, and basements with 85% RH tolerance .
Product Parameters Of Carbon Crystal Panel
Item |
Parameters |
Material |
Bamboo charcoal fiber, PP/PVC resin, calcium powder, additives, etc. |
Layer Structure |
7-layer composite (protective layer, surface film layer, UV-cured layer, PP co-extruded layer, carbon crystal layer, etc.) |
Standard Sizes |
- Thickness: 5/8" (≈15.8mm), 8mm, 12mm
- Dimensions: 1220×2440mm, 1220×2600mm (customizable) |
Density |
Approximately 0.8–1.2 g/cm³ |
Fire Rating |
Class B1 (flame-retardant), some premium products achieve Class A1 (non-combustible) |
Sound Insulation |
29 dB (equivalent to solid wall insulation) |
Thermal Conductivity |
≤0.03 W/(m·K) (excellent heat insulation) |
Water Absorption |
≤0.1% (outstanding moisture resistance) |
Surface Hardness |
Pencil hardness ≥2H (scratch-resistant) |
Nail Holding Power |
≥1500N (direct nailing/screwing supported) |